• Bhangra discussion is still going strong. Join us in our Facebook group!

    New user registration has been closed (as it was entirely spam). We encourage you to post in our Facebook group, even if it's a followup to an existing thread. BTF will continue to be archived and hosted here - Saleem

Machining Saaps Using CNC Router CAD/CNC FILES

hardeep_singh

Well-Known Member
Messages
1,463
I've attached a zip file to this post; this zip file contains a STEP file, which is an open solid model format. This file can be imported into Autodesk Fusion360, which is my home CAD software of choice.
You can download Fusion360 here, it's free:
http://www.autodesk.com/products/fusion-360/overview

Once imported into fusion360, toolpaths can be generated to machine out parts for 2 saaps out of a 11.9"x"48"x0.375" thick piece of piece of plastic or wood, if you choose to machine parts out of wood, i recommend modifying the cad model to add proper thickness since the cad model is defined to cut parts out of 0.375" stock.

THE CAD MODEL IS DESIGNED SO THAT THE STOCK IS OVERSIZED THE CAD FILE WIDTH IS 12.5" THE STOCK YOU WILL BE CUTTING FROM WILL BE 11.9" WIDE!!! OFFSET THE X-AXIS BY 0.25" FROM THE EDGE OF STOCK YOU WILL CUT OTHERWISE THE PARTS WILL COME OUT WRONG!!! MAKE SURE THE LENGTH OF THE STOCK IS INLINE/PARALLEL WITH THE Y-AXIS OF THE ROUTER, USE DATUMS PROPERLY!!!

The first zip file also contains 3 TAP files, this is a cnc file format that can be loaded into CNC software, in my case the software i'm using is MACH3, so these tap files were generated using fusion360 specifically for MACH3. If you have MACH3 running a cnc router then you can just load up these files and run your router. The first tap file machines all the holes, these holes will then allow for you to screw the stock down to the cnc router table so the parts don't fly away while machining. The second TAP file cuts out the handle cutouts. The third TAP file cuts and separates all the parts.

If you're using a different CAM/CNC software package use Fusion360 to generate the toolpath files for that specific sofware.

The CNC router I have is a custom built machine, you can find instructions to build your own machine online if you are capable. If not i would recommend using a machine at work or school if possible. If you're interested in buying your own machine i would recommend:
http://www.probotix.com/CNC-ROUTERS/METEOR-CNC-ROUTER

A 4 foot by 8 foot sheet of 3/8" thick hdpe will about $100 at your local industrial plastic distributor. I pay $120 per sheet which includes a cutting cost to have the distributor cut the sheet into eight 11.9"x48" size sheets. So from one large 4'x8' sheet i can produce 16 saaps. If you want to make saaps out of wood go to a local lumber distributor. If you want different colored HDPE find a distributor which has VYCOM HDPE Design Board (this is the stuff that kid from NC uses to make "wood colored" saaps):
http://www.vycomplastics.com/product-families/designboard/hdpe/

When i first started making saaps i was making all the parts manually and this required a significant amount of time/labor which is why i charged $50/saap. Since making saaps with cnc router decreased the labor required i dropped the price to $45/saap, if anyone is charging you more than this for saaps, you're getting ripped off. If you choose to make and sell saaps don't rip people off!

If you don't have the skills to figure this stuff out, then don't bother. If you have engineering skills and the resources give it a try and figure everything out on your own, i don't have time to provide support. Think of it as an opportunity to learn and expand your skills, these skills will help you in the future.

I started this whole plastic saap thing back in 2011 but i gotta give credit where credit's due. I don't know them personally but the first people to machine CNC saaps are the people who made the plastic saaps NYPD used at bhangra at the bell back in march 2014.
 

Attachments

ManrajBajwa

Member
Messages
32
hardeep_singh said:
I've attached a zip file to this post; this zip file contains a STEP file, which is an open solid model format. This file can be imported into Autodesk Fusion360, which is my home CAD software of choice.
You can download Fusion360 here, it's free:
http://www.autodesk.com/products/fusion-360/overview

Once imported into fusion360, toolpaths can be generated to machine out parts for 2 saaps out of a 11.9"x"48"x0.375" thick piece of piece of plastic or wood, if you choose to machine parts out of wood, i recommend modifying the cad model to add proper thickness since the cad model is defined to cut parts out of 0.375" stock.

THE CAD MODEL IS DESIGNED SO THAT THE STOCK IS OVERSIZED THE CAD FILE WIDTH IS 12.5" THE STOCK YOU WILL BE CUTTING FROM WILL BE 11.9" WIDE!!! OFFSET THE X-AXIS BY 0.25" FROM THE EDGE OF STOCK YOU WILL CUT OTHERWISE THE PARTS WILL COME OUT WRONG!!! MAKE SURE THE LENGTH OF THE STOCK IS INLINE/PARALLEL WITH THE Y-AXIS OF THE ROUTER, USE DATUMS PROPERLY!!!

The first zip file also contains 3 TAP files, this is a cnc file format that can be loaded into CNC software, in my case the software i'm using is MACH3, so these tap files were generated using fusion360 specifically for MACH3. If you have MACH3 running a cnc router then you can just load up these files and run your router. The first tap file machines all the holes, these holes will then allow for you to screw the stock down to the cnc router table so the parts don't fly away while machining. The second TAP file cuts out the handle cutouts. The third TAP file cuts and separates all the parts.

If you're using a different CAM/CNC software package use Fusion360 to generate the toolpath files for that specific sofware.

The CNC router I have is a custom built machine, you can find instructions to build your own machine online if you are capable. If not i would recommend using a machine at work or school if possible. If you're interested in buying your own machine i would recommend:
http://www.probotix.com/CNC-ROUTERS/METEOR-CNC-ROUTER

A 4 foot by 8 foot sheet of 3/8" thick hdpe will about $100 at your local industrial plastic distributor. I pay $120 per sheet which includes a cutting cost to have the distributor cut the sheet into eight 11.9"x48" size sheets. So from one large 4'x8' sheet i can produce 16 saaps. If you want to make saaps out of wood go to a local lumber distributor. If you want different colored HDPE find a distributor which has VYCOM HDPE Design Board:
http://www.vycomplastics.com/product-families/designboard/hdpe/

When i first started making saaps i was making all the parts manually and this required a significant amount of time/labor which is why i charged $50/saap. Since making saaps with cnc router decreased the labor required i dropped the price to $45/saap, if anyone is charging you more than this for saaps, you're getting ripped off. If you choose to make and sell saaps don't rip people off!

If you don't have the skills to figure this stuff out, then don't bother. If you have engineering skills and the resources give it a try and figure everything out on your own, i don't have time to provide support. Think of it as an opportunity to learn and expand your skills, these skills will help you in the future.

I started this whole plastic saap thing back in 2011 but i gotta give credit where credit's due. I don't know them personally but the first people to machine CNC saaps are the people who made the plastic saaps NYPD used at bhangra at the bell back in march 2014.

Saw the pics but is the screws strong enough to hold it in place? .It looks pretty small
 

hardeep_singh

Well-Known Member
Messages
1,463
ManrajBajwa said:
Saw the pics but is the screws strong enough to hold it in place? .It looks pretty small
this reminds me, the tool i'm using is a stainless steel flat 1/8" dual flute end mill. i run it at 12,500 rpm at a feed rate of 50 in/minute. i actually usually turn up the feedrate to around 75 in/minute. hdpe is one of the easiest materials to mill because it's a soft material that dissipates heat well enough to not melt and gum up during machining. it also doesn't wear the bit at all. due to the fact that it cuts like butter especially since i'm running high spindle speed and feed rate, i don't need to hold it down with more than just two wood screws screwed into the mdf board i use as a cutting surface. two point fixation is required for each part being cut.
 

ManrajBajwa

Member
Messages
32
hardeep_singh said:
ManrajBajwa said:
Saw the pics but is the screws strong enough to hold it in place? .It looks pretty small
this reminds me, the tool i'm using is a stainless steel flat 1/8" dual flute end mill. i run it at 12,500 rpm at a feed rate of 50 in/minute. i actually usually turn up the feedrate to around 75 in/minute. hdpe is one of the easiest materials to mill because it's a soft material that dissipates heat well enough to not melt and gum up during machining. it also doesn't wear the bit at all. due to the fact that it cuts like butter especially since i'm running high spindle speed and feed rate, i don't need to hold it down with more than just two wood screws screwed into the mdf board i use as a cutting surface. two point fixation is required for each part being cut.

Well I have seen HDPE pellets before but never use a plastic saap before but I do notice that the tendency for a plastic saap to be complete straight is easier compare with wooden saap.So maybe you would add in some lock mechanism to prevent to be so easily straight.




I attached a picture of a typical scissors locking mechanism perhaps you could implement it in your plastic saap give it a try.
 

Attachments

Top