• Bhangra discussion is still going strong. Join us in our Facebook group!

    New user registration has been closed (as it was entirely spam). We encourage you to post in our Facebook group, even if it's a followup to an existing thread. BTF will continue to be archived and hosted here - Saleem

TREBLE SIDE RIM DHOL**

Hardeep

UoB Bhangra & Gabru Chel Chabileh [GCC]
Messages
53
Yo,

Was wondering whether the THICKNESS OF THE METAL RIM which secures the TREBLE SIDE on the dhol makes a difference to the sound produced.

Currently, you often see dhols in shops with normal "fairly skinny" metal rims.

However, my dhol from India has a fairly thick and strong METAL RIM - was wondering whether there is any difference with sound.


Thanks Guyz, x
 

H G

Member
Messages
228
I don't think the rim itself affects the sound, but a thicker rim allows you to tighten the skin more. Its purpose is to prevent the hooks from piercing the skin (if it's ripped and you tighten it, it'll break off)
 

Hardeep

UoB Bhangra & Gabru Chel Chabileh [GCC]
Messages
53
So do you think it is fine for me to keep my thick treble rim?

Oh yeah, out of topic, when sanding a dhol, how much do you sand it down to?

How do you know when you can begin oiling the wood?
 

H G

Member
Messages
228
I'd only sand a dhol down if it has a varnish or paint...so sand it evenly until all the varnish is gone. If you're not that good with tools, it's best to use just regular sandpaper on a wooden block, but if you're experienced, you can use a belt sander (it's quicker). You can start oiling the dhol once all the varnish is gone...just try not to put too much at once. It's better to have 2-3 coats spread evenly.

As for the rim, only change it if you keep hitting it instead of the tilli (cause it's so thick). This'll force you to tighten the skin further and probably make the the tilli sound really high pitched. So if you can hit the tilli cleanly and keep the same pitch, you're good.
 
Top